Company News

 

Universal Bending Machine As the most widely used machine tool in the market today, its production power is more expensive than conventional shears, and these bobbin machines allow the car manufacturer to deliver satisfaction at the fastest speed The market demand for goods can thus be seen on the roll of universal roll machine development prospects are very spectacular.

Many people use the universal curling machine but the operation is not a special understanding, the following for everyone to tell you how to correctly operate universal curling machine.

1, Cleaning pinion, pinion bearings, bearing, after cleaning the bearing refueling, buckle tighten the screws. Check the reducer and auxiliary reducer chassis is clean, such as the need for cleaning, after washing with oil. Measure the length of the coupling to check that the coupling on the output shaft and pinion shaft of the gear unit is installed in place.

2, Clean the foundation and foundation hole.

3, According to the drawings, elevation of the reducer, motor, auxiliary drive mortar pier.

4, Pre-bending plate. First of all, the need to pre-bending the plate to the appropriate position (to be pre-bent plate to determine the location), and secondly, in the adjustment of the bracket to move the cylinder, so that the two bracket to move to a moderate letter, easy to carry out Pre-grips. Finally, operate the upper roller down the cylinder to the material surface (left and right parallel).

5, Rolling the plate, start the main motor, press the push button (left and right sync) to start rolling, work on both sides of the rolling machine should not be someone, to prevent the roll out of the work piece accident, How many times the pressure is running, complete the roll.